Kontron CP6923, Справочное руководство, Страница: 419 / 480

CP6923 Management Commands
Page 7 - 33 CP6923 CLI Reference Manual
7.9.8.1 no radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted, to the default value.
7.9.9 radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server
if no response is received. The timeout value is an integer in the range of 1 to 30.
7.9.9.1 no radius server timeout
This command sets the timeout value to the default value.
7.9.10 show radius
This command is used to display the various RADIUS configuration items for the switch as well as the configured
RADIUS servers. If the optional token 'servers' is not included, the following RADIUS configuration items are
displayed.
If you use the
[servers]
keyword, the following information displays:
Format
no radius server retransmit
Mode Global Config
Default 5
Format
radius server timeout <seconds>
Mode Global Config
Format
no radius server timeout
Mode Global Config
Format
show radius [servers]
Mode Privileged EXEC
Term Definition
Primary Server IP
Address or
Hostname
The configured server currently in use for authentication.
Number of
configured servers
The number of configured authentication servers, including DNS configured server.
Max number of
retransmits
The configured value of the maximum number of times a request packet is retransmitted.
Timeout Duration The configured timeout value, in seconds, for request re-transmissions.
Accounting Mode Yes or No.
Term Definition
IP Address or
Hostname
IP address or hostname of the configured RADIUS server.
Port The port in use by this server.
Type Primary or secondary.