Kontron CP6923, Справочное руководство, Страница: 226 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 14
To administratively control the traffic destined to a particular network and prevent it from being forwarded through
the router, you can configure a static reject route on the router. Such traffic would be discarded and the ICMP
destination unreachable message is sent back to the source. This is typically used for preventing routing loops. The
reject route added in the RTO is of the type
OSPF Inter-Area . Reject routes (routes of REJECT type installed by
any protocol) are not redistributed by OSPF/RIP. Reject routes are supported in OSPFv2 .
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show ip route
Route Codes: R - RIP Derived, O - OSPF Derived, C - Connected, S - Static
B - BGP Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 2
C 1.1.1.0/24 [0/1] directly connected, 0/11
C 2.2.2.0/24 [0/1] directly connected, 0/1
C 5.5.5.0/24 [0/1] directly connected, 0/5
S 7.0.0.0/8 [1/0] directly connected, Null0
OIA 10.10.10.0/24 [110/6] via 5.5.5.2, 00h:00m:01s, 0/5
C 11.11.11.0/24 [0/1] directly connected, 0/11
S 12.0.0.0/8 [5/0] directly connected, Null0
S 23.0.0.0/8 [3/0] directly connected, Null0
4.2.13 show ip route summary
Use this command to display the routing table summary. Use the optional
all
parameter to show the number of all
routes, including best and non-best routes. To include only the number of best routes, do not use the optional
parameter.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show ip route summary
Connected Routes..............................1
Static Routes.................................7
RIP Routes....................................0
BGP Routes....................................0
OSPF Routes...................................0
Intra Area Routes...........................0
Format
show ip route summary [all]
Modes • Privileged EXEC
• User EXEC
Term Definition
Connected Routes The total number of connected routes in the routing table.
Static Routes Total number of static routes in the routing table.
RIP Routes Total number of routes installed by RIP protocol.
BGP Routes Total number of routes installed by BGP protocol.
OSPF Routes Total number of routes installed by OSPF protocol.
Reject Routes Total number of reject routes installed by all protocols.
Total Routes Total number of routes in the routing table.