Kontron CP6923, Справочное руководство, Страница: 119 / 480

CP6923 Switching Commands
Page 2 - 75 CP6923 CLI Reference Manual
2.14.1.1 no monitor session
Use this command without optional parameters to remove the monitor session (port monitoring) designation from
the source probe port, the destination monitored port and all VLANs. Once the port is removed from the VLAN, you
must manually add the port to any desired VLANs. Use the
source interface <slot/port> parameter or
destination interface <slot/port>
to remove the specified interface from the port monitoring session.
Use the
mode
parameter to disable the administrative mode of the session.
2.14.2 no monitor
This command removes all the source ports and a destination port for the and restores the default value for mirroring
session mode for all the configured sessions.
2.14.3 show monitor session
This command displays the Port monitoring information for a particular mirroring session.
Note: Since the current version of FASTPATH software only supports one session, if you do not supply
optional parameters, the behavior of this command is similar to the behavior of the
no monitor
command.
Format
no monitor session <session-id> [{source interface <slot/port> |
destination interface <slot/port> | mode}]
Mode Global Config
Note: This is a stand-alone “no” command. This command does not have a “normal” form.
Default enabled
Format
no monitor
Mode Global Config
Note: The <session-id> parameter is an integer value used to identify the session. In the current
version of the software, the
<session-id>
parameter is always one (1).
Format
show monitor session <session-id>
Mode Privileged EXEC
Term Definition
Session ID An integer value used to identify the session. Its value can be anything between 1 and the
maximum number of mirroring sessions allowed on the platform.
Monitor Session
Mode
Indicates whether the Port Mirroring feature is enabled or disabled for the session identified
with
<session-id>
. The possible values are Enabled and Disabled.
Probe Port Probe port (destination port) for the session identified with
<session-id>
. If probe port is
not set then this field is blank.
Source Port The port, which is configured as mirrored port (source port) for the session identified with
<session-id>
.
If no source port is configured for the session then this field is blank.
Type Direction in which source port configured for port mirroring.Types are tx for transmitted
packets and rx for receiving packets.