Kontron CP6923, Справочное руководство, Страница: 246 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 34
4.8.15 area stub no-summary (OSPF)
This command configures the Summary LSA mode for the stub area identified by
<areaid>
. Use this command to
prevent LSA Summaries from being sent.
4.8.15.1 no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
<areaid>
.
4.8.16 area virtual-link (OSPF)
This command creates the OSPF virtual interface for the specified
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor.
4.8.16.1 no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor.
4.8.17 area virtual-link authentication
This command configures the authentication type and key for the OSPF virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor. The value for
<type>
is either none,
simple, or encrypt. The
[key]
is composed of standard displayable, non-control keystrokes from a Standard 101/
102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is
encrypt, the key may be up to 16 bytes. Unauthenticated interfaces do not need an authentication key. If the type is
encrypt, a key id in the range of 0 and 255 must be specified.The default value for authentication type is none.
Neither the default password key nor the default key id are configured.
Default disabled
Format
area <areaid> stub no-summary
Mode Router OSPF Config
Format
no area <areaid> stub no-summary
Mode Router OSPF Config
Format
area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
Format
no area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
Default none
Format
area <areaid> virtual-link <neighbor> authentication {none | {simple
<key>} | {encrypt <key> <keyid>}}
Mode Router OSPF Config