Kontron CP6923, Справочное руководство, Страница: 440 / 480

CP6923 FASTPATH log messages
Page B - 7 CP6923 CLI Reference Manual
B.4 Switching
Table 15: SSLT Log Messages
Component Message Cause
SSLT SSLT: Exceeded maximum,
ssltConnectionTask
Exceeded maximum allowed SSLT
connections.
SSLT SSLT: Error creating Secure server socket6 Failed to create secure server socket for IPV6.
SSLT SSLT: Can't connect to unsecure server at
XXXX, result = YYYY, errno = ZZZZ
Failed to open connection to unsecure server.
XXXX is the unsecure server socket address.
YYYY is the result returned from connect
function and ZZZZ is the error code.
SSLT SSLT: Msg Queue is full, event=XXXX Failed to send the received message to the
SSLT message queue as message queue is
full. XXXX indicates the event to be sent.
SSLT SSLT: Unknown UI event in message,
event=XXXX
Failed to dispatch the received UI event to the
appropriate SSLT function as it’s an invalid
event. XXXX indicates the event to be
dispatched.
SSLT ssltApiCnfgrCommand: Failed calling
ssltIssueCmd.
Failed to send the message to the SSLT
message queue.
SSLT SSLT: Error loading certificate from file XXXX Failed while loading the SSLcertificate from
specified file. XXXX indicates the file from
where the certificate is being read.
SSLT SSLT: Error loading private key from file Failed while loading private key for SSL
connection.
SSLT SSLT: Error setting cipher list (no valid
ciphers)
Failed while setting cipher list.
SSLT SSLT: Could not delete the SSL semaphores Failed to delete SSL semaphores during
cleanup.of all resources associated with the
OpenSSL Locking semaphores.
Table 16: User_Manager Log Messages
Component Message Cause
User_Manager User Login Failed for XXXX Failed to authenticate user login. XXXX
indicates the username to be authenticated.
User_Manager Access level for user XXXX could not be
determined. Setting to READ_ONLY.
Invalid access level specified for the user. The
access level is set to READ_ONLY. XXXX
indicates the username.
User_Manager Could not migrate config file XXXX from
version YYYY to ZZZZ. Using defaults.
Failed to migrate the config file. XXXX is the
config file name. YYYY is the old version
number and ZZZZ is the new version number.
Table 17: Protected Ports Log Messages
Component Message Cause
Protected Ports Protected Port: failed to save configuration This appears when the protected port
configuration cannot be saved
Protected Ports protectedPortCnfgrInitPhase1Process:
Unable to create r/w lock for protectedPort
This appears when protectedPortCfgRWLock
Fails
Protected Ports protectedPortCnfgrInitPhase2Process:
Unable to register for VLAN change callback
This appears when nimRegisterIntfChange
with VLAN fails