Kontron CP6923, Справочное руководство, Страница: 155 / 480

CP6923 Switching Commands
Page 2 - 111 CP6923 CLI Reference Manual
2.22.6 show port-security
This command displays the port-security settings. If you do not use a parameter, the command displays the settings
for the entire system. Use the optional parameters to display the settings on a specific interface or on all interfaces.
For each interface, or for the interface you specify, the following information appears:
2.22.7 show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
2.22.8 show port-security static
This command displays the statically locked MAC addresses for port.
2.22.9 show port-security violation
This command displays the source MAC address of the last packet discarded on a locked port.
Mode Interface Config
Format
show port-security [{<slot/port> | all}]
Mode Privileged EXEC
Term Definition
Admin Mode Port Locking mode for the entire system. This field displays if you do not supply any parameters.
Term Definition
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
Format show port-security dynamic <slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of dynamically locked MAC.
Format
show port-security static <slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of statically locked MAC.
Format
show port-security violation <slot/port>