Kontron CP6923, Справочное руководство, Страница: 274 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 62
4.9.7 distance rip
This command sets the route preference value of RIP in the router. Lower route preference values are preferred
when determining the best route. A route with a preference of 255 cannot be used to forward traffic.
4.9.7.1 no distance rip
This command sets the default route preference value of RIP in the router.
4.9.8 distribute-list out (RIP)
This command is used to specify the access list to filter routes received from the source protocol.
4.9.8.1 no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
4.9.9 ip rip authentication
This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The value of
< type >
is either
none
,
simple
, or
encrypt
. The value for authentication key [
key
] must be 16 bytes or less. The [
key
]
is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of
< type >
is
encrypt
, a keyid in the range of 0 and 255 must be specified. Unauthenticated interfaces do not need
an authentication key or authentication key ID.
4.9.9.1 no ip rip authentication
This command sets the default RIP Version 2 Authentication Type for an interface.
Default 15
Format
distance rip < 1-255 >
Mode Router RIP Config
Format
no distance rip
Mode Router RIP Config
Default 0
Format
distribute-list <1-199> out {ospf | bgp | static | connected}
Mode Router RIP Config
Format
no distribute-list <1-199> out {ospf | bgp | static | connected}
Mode Router RIP Config
Default none
Format
ip rip authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
Mode Interface Config
Format
no ip rip authentication
Mode Interface Config