Kontron CP6923, Справочное руководство, Страница: 152 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 108
2.21.3.1 no set mld querier timer expiry
Use this command to set the MLD Querier timer expiration period to its default value.
2.21.4 set mld querier election participate
Use this command to enable the Snooping Querier to participate in the Querier Election process when it discovers
the presence of another Querier in the VLAN. When this mode is enabled, if the Snooping Querier finds that the
other Querier’s source address is better (less) than the Snooping Querier’s address, it stops sending periodic
queries. If the Snooping Querier wins the election, then it will continue sending periodic queries.
2.21.4.1 no set mld querier election participate
Use this command to set the snooping querier not to participate in querier election but go into a non-querier mode
as soon as it discovers the presence of another querier in the same VLAN.
2.21.5 show mldsnooping querier
Use this command to display MLD Snooping Querier information. Configured information is displayed whether or
not MLD Snooping Querier is enabled.
When the optional arguments <
vlandid
> are not used, the command displays the following information.
Format
no set mld querier timer expiry
Mode Global Config
Default disabled
Format
set mld querier election participate
Mode VLAN Config
Format
no set mld querier election participate
Mode VLAN Config
Format
show mldsnooping querier [{detail | vlan < vlanid >}]
Mode Privileged EXEC
Field Description
Admin Mode Indicates whether or not MLD Snooping Querier is active on the switch.
Admin Version Indicates the version of MLD that will be used while sending out the queries. This is defaulted
to
MLD v1
and it cannot be changed.
Querier Address Shows the IP address which will be used in the IPv6 header while sending out MLD queries.
It can be configured using the appropriate command.
Query Interval Shows the amount of time in seconds that a Snooping Querier waits before sending out the
periodic general query.
Querier Timeout Displays the amount of time to wait in the Non-Querier operational state before moving to a
Querier state.