Kontron CP6923, Справочное руководство, Страница: 358 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 44
• h-node—Hybrid (recommended)
6.8.13.1 no netbios-node-type
This command removes the NetBIOS node Type.
6.8.14 next-server
This command configures the next server in the boot process of a DHCP client.The
<address>
parameter is the
IP address of the next server in the boot process, which is typically a TFTP server.
6.8.14.1 no next-server
This command removes the boot server list.
6.8.15 option
The option command configures DHCP Server options. The < code > parameter specifies the DHCP option code
and ranges from 1-254. The
<ascii string>
parameter specifies an NVT ASCII character string. ASCII character
strings that contain white space must be delimited by quotation marks. The
hex <string>
parameter specifies
hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a
period (for example,
a3.4f.22.0c
), colon (for example,
a3:4f:22:0c
), or white space (for example,
a3 4f 22
0c
).
6.8.15.1 no option
This command removes the DHCP Server options. The
< code >
parameter specifies the DHCP option code.
Default none
Format
netbios-node-type <type>
Mode DHCP Pool Config
Format
no netbios-node-type
Mode DHCP Pool Config
Default inbound interface helper addresses
Format
next-server <address>
Mode DHCP Pool Config
Format no next-server
Mode DHCP Pool Config
Default none
Format
option <code> {ascii string | hex <string1> [<string2>...<string8>] | ip
<address1> [<address2>...<address8>]}
Mode DHCP Pool Config
Format
no option <code>
Mode DHCP Pool Config