Kontron CP6923, Справочное руководство, Страница: 238 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 26
Example: The following shows example CLI display output for the command.
show ip vrrp interface <u/s/p> <vrid>
Primary IP Address............................. 1.1.1.5
VMAC Address................................... 00:00:5e:00:01:01
Authentication Type............................ None
Priority....................................... 80
Configured priority.......................... 100
Advertisement Interval (secs).................. 1
Pre-empt Mode.................................. Enable
Administrative Mode............................ Enable
State.......................................... Initialized
Track Interface State DecrementPriority
--------------- ------ ------------------
<0/1> down 10
TrackRoute (pfx/len)
State DecrementPriority
------------------------ ------ ------------------
10.10.10.1/255.255.255.0 down 10
4.5.14 show ip vrrp interface brief
This command displays information about each virtual router configured on the switch. This command takes no
options. It displays information about each virtual router.
Configured Priority The priority configured through the ip vrrp < vrid > priority < 1-254 > command.
Advertisement
interval
The advertisement interval in seconds for the specific virtual router.
Pre-Empt Mode The preemption mode configured on the specified virtual router.
Administrative
Mode
The status (Enable or Disable) of the specific router.
State The state (Master/backup) of the virtual router.
Format
show ip vrrp interface brief
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes.
VRID The router ID of the virtual router.
IP Address The virtual router IP address.
Mode Indicates whether the virtual router is enabled or disabled.
State The state (Master/backup) of the virtual router.
Term Definition