Kontron CP6923, Справочное руководство, Страница: 167 / 480

CP6923 Switching Commands
Page 2 - 123 CP6923 CLI Reference Manual
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Software Rev: xxx xxx xxx
Serial Num: xxx xxx xxx
Mfg Name: xxx xxx xxx
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
2.24.11 show lldp med remote-device
Use this command to display the summary information about remote devices that transmit current LLDP MED data
to the system. You can show information about LLDP MED remote data received on all valid LLDP interfaces or on
a specific physical interface.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Interface Remote ID Device Class
--------- --------- ------------
0/8
1 Class I
0/9 2 Not Defined
Format
show lldp med remote-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Local Interface The interface that received the LLDPDU from the remote device.
Remote ID An internal identifier to the switch to mark each remote device to the system.
Device Class Device classification of the remote device.