Kontron CP6923, Справочное руководство, Страница: 188 / 480

Quality of Service (QoS) Commands CP6923
CP6923 CLI Reference Manual Page 3 - 14
3.3.15 match protocol
This command adds to the specified class definition a match condition based on the value of the IP Protocol field in
a packet using a single keyword notation or a numeric value notation.
To specify the match condition using a single keyword notation, the value for
<protocol-name >
is one of the
supported protocol name keywords. The currently supported values are:
icmp
,
igmp
,
ip
,
tcp
,
udp
. A value of
ip
matches all protocol number values.
To specify the match condition using a numeric value notation, the protocol number is a standard value assigned by
IANA and is interpreted as an integer from 0 to 255.
3.3.16 match source-address mac
This command adds to the specified class definition a match condition based on the source MAC address of a
packet. The
<address >
parameter is any layer 2 MAC address formatted as six, two-digit hexadecimal numbers
separated by colons (e.g., 00:11:22:dd:ee:ff). The
<macmask >
parameter is a layer 2 MAC address bit mask, which
may not be contiguous, and is formatted as six, two-digit hexadecimal numbers separated by colons (e.g.,
ff:07:23:ff:fe:dc). The optional
[not]
parameter has the effect of negating this match condition for the class (i.e.,
match all source MAC addresses except for what is specified here).
3.3.17 match srcip
This command adds to the specified class definition a match condition based on the source IP address of a packet.
The
<ipaddr>
parameter specifies an IP address. The
<ipmask>
parameter specifies an IP address bit mask and
must consist of a contiguous set of leading 1 bits.
Note: This command does not validate the protocol number value against the current list defined by
IANA.
Default none
Format
match protocol {<protocol-name> | <0-255>}
Mode Ipv6-Class-Map Config
Class-Map Config
Note: This command is not available on the Broadcom 5630x platform.
Default none
Format
match source-address mac <address> <macmask>
Mode Ipv6-Class-Map Config
Class-Map Config
Default none
Format
match srcip <ipaddr> <ipmask>
Mode Class-Map Config