Kontron CP6923, Справочное руководство, Страница: 353 / 480

CP6923 Utility Commands
Page 6 - 39 CP6923 CLI Reference Manual
For each configured server:
6.7.11 sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a power of two.
6.7.11.1 no sntp multicast client poll-interval
This command resets the poll-intervall value.
6.8 DHCP Server Commands
This section describes the commands you to configure the DHCP server settings for the switch. DHCP uses UDP
as its transport protocol and supports a number of features that facilitate in administration address allocations.
6.8.1 ip dhcp pool
This command configures a DHCP address pool name on a DHCP server and enters DHCP pool configuration
mode.
6.8.1.1 no ip dhcp pool
This command removes the DHCP address pool. The name should be previously configured pool name.
Term Definition
IP Address /
Hostname
IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in unicast
mode.
Port Server Port Number.
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast
Requests
Number of requests to the server.
Failed Unicast
Requests
Number of failed requests from server.
Format
sntp multicast client poll-intervall <6..10>
Mode Global Config
Format
no sntp multicast client poll-intervall
Mode Global Config
Default none
Format
ip dhcp pool <name>
Mode Global Config
Format
no ip dhcp pool <name>