Kontron CP6923, Справочное руководство, Страница: 320 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 6
6.3 ATCA commands
6.3.1 set board bootcycle
This command configures a bootcycle-detection. The command activates/deactivates a bootcycle-detection and (if
activated) sets the related parameters. Parameter ‘none’ deactivates the bootcycle detection. Parameters ‘event’
and ‘pwr-down’ activate the bootcycle detection and execute an action if the number of <cyles>, checked in
<interval> seconds, is reached. The executed action is the generation of an event and additionally for ‘pwr-down’
switch off the Power-PC.
6.3.2 set board sensor threshold
This command sets a new threashold value for a sensor. The <record-id> (of SDR) for a specific sensor is displayed
by the related “show” command
Value-types are:
6.3.3 set board device-id
This command sets the device ID for the board. The device ID is used in the management device locator sensor
(show boardinfo sensors).
6.3.4 set board ipmb redundant
This command enables or disables the IPMB redundant mode.
Mode Privileged EXEC
Format
set board bootcycle [none | {event | pwr-down} <interval> | <cycles>}]
Mode Priviledged EXEC
Format
set board sensor threshold <record-id> <value-type> <value>
Mode Priviledged EXEC
Value-type Description
lower-non-critical Set lower non-critical threshold value
lower-critical Set lower critical threshold value
lower-non-recover Set lower non-recoverable threshold value
upper-non-critical Set upper non-critical threshold value
upper-critical Set upper critical threshold value
upper-non-recover Set upper non-recoverable threshold value
Format
set board device-id <string>
Mode Priviledged EXEC
Format set board ipmb redundant {enable | disable}
Mode Priviledged EXEC