Kontron CP6923, Справочное руководство, Страница: 53 / 480

CP6923 Switching Commands
Page 2 - 9 CP6923 CLI Reference Manual
2.2.4 spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
2.2.4.1 no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
2.2.5 spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
2.2.5.1 no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
2.2.6 spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree (MSTP)
BPDUs. Use the
<slot/port> parameter to transmit a BPDU from a specified interface, or use the all keyword
to transmit BPDUs from all interfaces. This command forces the BPDU transmission when you execute it, so the
command does not change the system configuration or have a “no” version.
2.2.7 spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that this switch is
currently using. The
<name>
is a string of up to 32 characters.
Default disabled
Format
spanning-tree bpduflood
Mode Interface Config
Default disabled
Format
no spanning-tree bpduflood
Mode Interface Config
Default disabled
Format
spanning-tree bpduguard
Mode Global Config
Default disabled
Format no spanning-tree bpduguard
Mode Global Config
Format
spanning-tree bpdumigrationcheck {<slot/port> | all}
Mode Global Config
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name <name>