Kontron CP6923, Справочное руководство, Страница: 415 / 480

CP6923 Management Commands
Page 7 - 29 CP6923 CLI Reference Manual
argument specifies the type (trap or inform request) for generating traps. The default is ‘trap’. The ‘inform request’
is only possible for version 2c. This is implicitely set by specifying ‘inform request’.
7.8.22 snmptrap notification
This command specifies the notification type (trap or inform request) for generating traps. The default is ‘trap’. The
‘inform request’ is only possible for version 2c. The version is not checked, but setting ‘inform request’ for version 1
means that the trap is sent as ‘trap’ anyway.
7.8.23 snmp-server engine-id
This command configures the algorithm used to generate the Snmp-Engine-ID. This object is used only in SNMPv3.
The algorithm should generate a unique ID (see RFC 3411). It can be selected a RFC 3411 defined algorithm
containing the MAC address (mac), a specified IP address (ip) or a specified text (text). It may be also selected a
simple enterprise specific algorithm (simple) containing the SNMP port (161). Note that this algorithm is
not unique.
Default is the RFC 3411 related algorithm with MAC address (mac).
A new configured algorithm will become effective not before the system has been rebooted because the Snmp-
Engine-ID is used also to encrypt the community and user passwords. Therefore the user have to save the
configuration and
reboot the system to activate the new algorithm.
7.8.24 show snmp-engine-id
This command displays the configured and the currently active algorithm used to generate the Snmp-Engine-ID. A
configured algorithm will become active after the next system reboot.
7.9 RADIUS Commands
This section describes the commands you use to configure the switch to use a Remote Authentication Dial-In User
Service (RADIUS) server on your network for authentication and accounting.
Format
snmptrap <name> ipaddr <ipaddr>
snmptrap <name> ipaddr <ipaddr> snmpversion {snmpv1 | snmpv2}
snmptrap <name> ipaddr <ipaddr> notification {trap | inform}
Mode Global Config
Format
snmptrap notification <name> <ipaddr> {trap | inform}
Mode Global Config
Format
snmp-server engine-id mac
snmp-server engine-id ip
<ipaddr>
snmp-server engine-id text <text>
snmp-server engine-id simple
Mode Global Config
Format
show snmp-engine-id
Mode Priviledged EXEC