Kontron CP6923, Справочное руководство, Страница: 157 / 480

CP6923 Switching Commands
Page 2 - 113 CP6923 CLI Reference Manual
data LLDPDUs. The multiplier range is 2-10. The
<reinit-seconds>
is the delay before re-initialization, and the
range is 1-0 seconds.
2.23.3.1 no lldp timers
Use this command to return any or all timing parameters for local data transmission on ports enabled for LLDP to
the default values.
2.23.4 lldp transmit-tlv
Use this command to specify which optional type length values (TLVs) in the 802.1AB basic management set are
transmitted in the LLDPDUs. Use
sys-name
to transmit the system name TLV. To configure the system name, see
7.8.1 “snmp-server“on page 7 - 21. Use
sys-desc
to transmit the system description TLV. Use
sys-cap
to transmit
the system capabilities TLV. Use
port-desc
to transmit the port description TLV. To configure the port description,
see 2.1.7 “description“on page 2 - 4.
2.23.4.1 no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without parameters to remove
all optional TLVs from the LLDPDU.
2.23.5 lldp transmit-mgmt
Use this command to include transmission of the local system management address information in the LLDPDUs.
2.23.5.1 no lldp transmit-mgmt
Use this command to include transmission of the local system management address information in the LLDPDUs.
Use this command to cancel inclusion of the management information in LLDPDUs.
Default • interval—30 seconds
• hold—4
• reinit—2 seconds
Format
lldp timers [interval <interval-seconds>] [hold <hold-value>] [reinit
<reinit-seconds>
]
Mode Global Config
Format
no lldp timers [interval] [hold] [reinit]
Mode Global Config
Default no optional TLVs are included
Format
lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format
lldp transmit-mgmt
Mode Interface Config
Format
no lldp transmit-mgmt