Kontron CP6923, Справочное руководство, Страница: 305 / 480

CP6923 Multicast Commands
Page 5 - 21 CP6923 CLI Reference Manual
5.5.5.1 no ip igmp query-interval
This command resets the query interval for the specified interface to the default value. This is the frequency at which
IGMP Host-Query packets are transmitted on this interface.
5.5.6 ip igmp query-max-response-time
This command configures the maximum response time interval for the specified interface, which is the maximum
query response time advertised in IGMPv2 queries on this interface.The time interval is specified in tenths of a
second. The range for
< maxresptime>
is 0 to 255 tenths of a second.
5.5.6.1 no ip igmp query-max-response-time
This command resets the maximum response time interval for the specified interface, which is the maximum query
response time advertised in IGMPv2 queries on this interface to the default value. The maximum response time
interval is reset to the default time.
5.5.7 ip igmp robustness
This command configures the robustness that allows tuning of the interface. The robustness is the tuning for the
expected packet loss on a subnet. If a subnet is expected to have a lot of loss, the Robustness variable may be
increased for the interface. The range for
< robustness>
is 1 to 255.
5.5.7.1 no ip igmp robustness
This command sets the robustness value to default.
5.5.8 ip igmp startup-query-count
This command sets the number of Queries sent out on startup, separated by the Startup Query Interval on the
interface. The range for
< count>
is 1 to 20.
Format
no ip igmp query-interval
Modes Interface Config
Default 100
Format
ip igmp query-max-response-time < seconds >
Mode Interface Config
Format
no ip igmp query-max-response-time
Mode Interface Config
Default 2
Format
ip igmp robustness < robustness >
Mode Interface Config
Format
no ip igmp robustness
Mode Interface Config
Default 2