IAI MCON-C, Инструкция по эксплуатации

Страница: 5 / 480

Table of Overall Contents
Name for Each Parts and Their Functions
In this section, explains the functions and conditions of the
connectors and LED lamps located on the front of the controller.
Chapter 1 Specifications Check
In this chapter, explains about the specifications, current
amperage, model codes and so on for the products.
Chapter 2 Wiring
In this chapter, explains about the connections to actuators and
external devices.
Chapter 3 Operation
In this chapter, explains the details of each operation such as the
initial settings, how to set up in the position data or parameter
data, control signals in each mode and how to make operation.
Chapter 4 Vibration Suppress Control Function
In this chapter, explains about the vibration suppress control
function to reduce vibration caused by the actuator.
Chapter 5 Collision Detection Feature
In this chapter, explains the setup and tuning for collision
detection feature.
Chapter 6 Power-Saving Function
In this chapter, explains the feature to reduce the power
consumption.
Chapter 7 Absolute Reset and Absolute Battery
In this chapter, explains the procedures for absolute reset and
replacement of battery.
Chapter 8 Parameter
In this chapter, explains how to set up or fine-tune the controller
settings.
Chapter 9 Troubleshooting
In this chapter, explains how to act in errors and contents of them.
Chapter 10 Appendix
In this chapter, explains compliance with safety categories,
model codes of connectable actuators, etc.
Chapter 11 Warranty
In this chapter, explains about the Warranty.
19
63
275
283
269
13
39
259
265
325
349
465