Hioki LR8410-20, Инструкция по эксплуатации

Страница: 36 / 364

1.2 Measurement Flow
24
(4) Connect the measurement unit and wire-
less logger to the measurement target.
(3) Connect the measurement
cables.(p. 46)
Configure Recording Settings (p. 68)
1
Set the data acquisition (record-
ing) interval (
[Interval] ), and re-
cording length ( [Record time] ).
2
Enable auto saving of measured
data to removable storage (SD
memory card or USB flash drive)
(p. 163).
Data stored in internal buffer memory is
lost about 30 minutes after power-off. It
is recommended to have the instrument
automatically save important data to the
included SD memory card or an optional
SD memory card. (Data can also be auto-
matically saved to a USB memory stick.)
Move to a
setting item
Open the
setting options
Select Apply
1
1
2
3. Set the measurement conditions.(p. 68)
Select input channels, and set input
types and measurement ranges.
Pre-existing setting configuration data can be loaded from the instrument or removable storage
(p. 171).
Make other settings as needed.

Waveform Display (p. 91)

Scaling (p. 95)

Titles and Comments (p. 98)

Noise Suppression (p. 100)

View/Edit All-Channel Settings List
(p. 101)
Configure Input Channels (p. 72)
Move to a
setting
Open the
setting
Select Apply