Hioki LR8410-20, Инструкция по эксплуатации

Страница: 54 / 364

2.1 Using the Battery Pack (Option)
42
An attached battery pack can be charged whenever the instrument or measurement
unit is connected to commercial power using the Z1008 AC Adapter, regardless of
whether the instrument or unit is turned on. (p. 44)
Charge the Battery Pack
• Displaying the monitor screen or channel configuration screen will use
the same amount of battery power as measurement (even if measure-
ment has not been started), because those screens cause the instru-
ment to communicate with measurement units.
• Operating times will shorten as the temperature falls.
Charging is finished when the
CHARGE LED turns off.
The CHARGE LED
lights orange when
charging begins.
Instrument
Measurement unit
Charging is finished when the CHARGE LED
turns off.
The CHARGE LED lights orange
when charging begins.
Battery pack continuous operating times
Instrument:
The continuous operating time when powered by the battery pack alone is approxi-
mately three hours (after being fully charged, with 25% backlight brightness, reference
value at 23°C).
See:
"Adjust Backlight Brightness" (p .198)
Measurement units:
Longer continuous operating times can be achieved on battery pack power if a longer
recording interval is used. The continuous operating time when powered by the battery
pack alone is approximately 24 hours (after being fully charged, recording interval of
100 ms, reference value at 23°C) or approximately 120 hours (after being fully charged,
recording interval of 1 min, reference value at 23°C).