Hioki LR8410-20, Инструкция по эксплуатации

Страница: 347 / 364

Appendix 10 Introduction to Measurement Applications
A
31
Appendix
Example settings
Unit: Unit 1; channel: 1-1; input: voltage;
range: 1 to 5 V
Make input channel settings on the [CH] screen.
Measurement Hints
The 1 to 5 V range is obtained by automatically setting the upper and lower limit for the
10 V range display range to 5 V and 1 V, respectively. If you wish to change the upper and
lower limit values, use the 10 V range.
1 V
5 V
When set as shown at the left,
the vertical axes appear like this.
1
2
Select
Apply
3
Start and finish measuring
• Data corresponding to the set recording time is recorded
along with calculated value data every minute and saved to
the SD memory card. Once recording is started, it will stop
after 1 h.
• To stop recording early, press STOP .
Press START .