Hioki LR8410-20, Инструкция по эксплуатации

Страница: 63 / 364

2.3 Making Connections
51
3
2
Chapter 2 M
eas
ureme
n
t Prep
ar
at
ions
<Connecting to the terminals of the Wireless Universal Unit>
Required items: phillips screwdriver (No.2), flat-blade screwdriver (tip width 2.6 mm),
measurement leads
Recommended wire diameter:

Single strand diameter:

0.4 mm -

1.2 mm (AWG26-16)

Multi-strand:

0.2 mm
2
- 0.75 mm
2
(AWG24-20)

Standard insulation stripping length: 8 mm
Resistance Measurement
1
With a Phillips screwdriver,

loosen the screws in the terminal
block cover, and lift the cover.
2
Push in the button on the con-
nector with a flatblade screw-
driver.
3
With the button held in,

insert the cable into the cable
connection hole.
6
Replace the terminal block

cover, and tighten the screws.
Tighten the terminal block cover
screws to 0.6 N

m or less.
4
Release the button.
The cable is locked.
4-wire configuration
(2- and 3-wire configurations are not
supported)
5
Connect to the measurement

object.
2
3
4
button
5