Hioki LR8410-20, Инструкция по эксплуатации

Страница: 205 / 364

7.3 Waveform Calculations
193
3
Cha
p
te
r 7
Numerical Ca
lcula
tions/W
avef
orm Cal
cula
tions
7
You can have the instrument calculate power using the waveform calculation formula by
configuring the settings shown in the [Power Calculation] dialog box.
Calculating Power (When Using the LR8513)
• This functionality uses a simplified approach to calculating the power,
and the calculation results may differ from the actual power value. Use a
power meter if you require an accurate power measurement.
• Data that has been specified as a current value is not checked to verify
that it does in fact represent a current value. The calculation will be per-
formed regardless of the type of data specified.
1
Select [CALC1] or [CALC2] and
channel W1 to W30 , then select
the check box ( [ ] ) to enable cal-
culation.
2
Set the [calculation formula] ,

and press ENTER .
The coefficient setting dialog is dis-
played.
3
Select [Power calculation] in the
dialog box and press the ENTER
key.
A power calculation settings dialog box
will be displayed.
4
Enter/select the power type, cur-
rent channel 1, current channel 2,
voltage 1, voltage 2, and power
factor and press
[ENTER] .
The waveform calculation settings will
be configured automatically based on
your settings.
1
2
3
4
: ON
: OFF