Hioki LR8410-20, Инструкция по эксплуатации

Страница: 145 / 364

5.1 Triggering Measurement Start and Stop
133
3
5
Chapter 5 S
p
ecif
ying Crite
ria
for M
easurement
s
Using a Window Trigger
Set the range within which you wish to start or stop measure-
ment using the upper and lower limit values.You can select
whether measurement starts or stops when the input signal level
enters (In) or exits (Out) of this window.

Upper and lower thresholds can be verified in the monitor or on
the Waveform screen. When scaling is enabled, the scaled
threshold values are displayed.
Make trigger settings on the
[CH] screen of the displayed chan-
nel.
See:
"Key Setting Procedure" (p .130)
T
T
T
T
IN OUT
1
Select [Window] as the start/stop trigger type.
2
Select trigger timing (window type).
3
Enter the upper/lower threshold value.
Setting options: (

: default setting)
In

Trigger when the input signal level enters the
window defined by the upper/lower thresholds.
Out Trigger when the input signal level exits the win-
dow defined by the upper/lower thresholds.
1
2
3
3
Scaled values are displayed
when scaling is enabled.