Hioki LR8410-20, Инструкция по эксплуатации

Страница: 165 / 364

5.9 Alarm Output
153
3
5
Chapter 5 S
p
ecif
ying Crite
ria
for M
easurement
s
You can verify whether the alarm criteria have been satisfied for a given channel and
whether that channel is in the alarm state on the
[Wave+Value], [Value+Cmnt], or
[Value] screen.

Channel alarm status
• Yellow

: alarm criteria are satisfied
• Green: alarm criteria are not satisfied

: When [Alarm Hold] is enabled (set to [On] ),the indicator remains yellow because the criteria remain
satisfied (until measurement is finished).
Select the [Wave+Value] , [Val-
ue+Cmnt] , or [Value] Waveform/
Numerical screen.
Select [ALARM] with the UNIT key.
Put the cursor here and press ENTER to
directly select which input unit to dis-
play.
1
2
ALM1 status indicator
ALM3 status indicator
ALM2 status indicator
ALM4 status indicator
 Alarm output status (ALM)
• Red: alarm signal output active
• Green: alarm signal output inactive
Select the [Wave+Value] , [Val-
ue+Cmnt] , or [Value] Waveform/
Numerical screen.
Select [UNIT1],[CALC1],

[CALC2] with the UNIT key.
Put the cursor here and press ENTER to
directly select which input unit to display.
1
2