Hioki LR8410-20, Инструкция по эксплуатации

Страница: 126 / 364

4.2 Observing Waveforms
114
A gauge corresponding to the measurement range of each channel can
be displayed at the left side of the screen, for confirming measurement
values.The color of the gauge matches the waveform display color of its
input channel. Channel settings can also be changed.
Displaying Gauges
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions
Key Setting Procedure
Gauge

Display area settings

Display position (p. 92)

Upper and lower

display limits (p. 93)
Select [Gauge+Wave] .
About Channel Settings
Press CHAN to select channels for gauge display.
However, note that when measurement data is displayed, only those channels that are

enabled (set to On ) for measurement can be selected.
(Measurement cannot be started with measurement disabled for all channels.)

Voltage measurement (p. 75)

Temperature measurement

(Thermocouple) (p. 76)

Temperature measurement (RTD) (p. 78)

Humidity measurement (p. 79)

Resistance Measurement (p. 81)

Temperature Measurement Settings
(When LR8514 or LR8520 is used) (p .79)

Humidity Measurement Settings
(When LR8511 is used) (p .80)

Humidity Measurement Settings (When
LR8514 or LR8520 is used) (p .80)

Resistance Measurement Settings (p .81)

Integration (Count) Measurement Set-
tings (p .82)

Revolution Measurement Settings (p .84)

Current Measurement Settings (p .87)

Fungal Index and Fungal Growth Projec-
tion Settings (p .89)
Channel marker
Displays the waveform's
channel.
Switches between channel
settings and event set-
tings.

Event Search (p. 121)

Select the alarm display type (p. 151)

Waveform Calculation (p. 191)