Hioki LR8410-20, Инструкция по эксплуатации

Страница: 217 / 364

9.1 External Trigger Input
205
3
Chapter 9 Ext
ernal Cont
rol
9
The external control terminals on the instrument support trigger signal input and
output.
Be sure to read p. 52 to p. 53 for external control terminal connection details.
Triggering can be controlled by applying a signal from an external trigger source
(p. 136).
This allows synchronous operation of multiple instruments by parallel triggering

(p. 209).
See "Using External Triggering"(p .136) for setting procedures and trigger signal
details.
The external signal input function can be changed to insert event marks.
See:
"Inserting Event Marks Using External Input Signals"(p .122)
External Control
Chapter 9
9.1 External Trigger Input
External signal
input
(EXT.TRIG)
Trigger event occurs.
2.5 ms or
greater
2.5 ms or greater
HIGH: 2.5 to 5.0 V
LOW: 0 to 0.8 V
Triggering occurs at the selecting rising or falling edge.
(according to the selected
[Ext trig] detection edge)
Voltage range HIGH level: 2.5 to 5.0 V, LOW level: 0 to 0.8 V
Pulse width HIGH period: 2.5 ms or greater, LOW period 2.5 ms or greater
Maximum input voltage DC0 to 10 V
Trigger Input Signals