Hioki LR8410-20, Инструкция по эксплуатации

Страница: 199 / 364

7.1 Calculate Average, Maximum, Minimum, and Etc.
187
3
Cha
p
te
r 7
Numerical Ca
lcula
tions/W
avef
orm Cal
cula
tions
7
4
When set to Ref
Time.
3
Configure Auto Save.
Select [Calc(post meas.)] , [Wa Calc] , or [CSV + Calc] .

When [Waveform(realtime)] or [CSV(realtime)] is selected, the settings in step 4 are
not available.
4
Select a split-calculation (timing) method.
5
Start measuring.
6
Select [Wave+Calc] display on the Wave/Numerical screen.
Numerical calculation results are displayed.
Setting options: (

: default setting)
Off
 Save only the last calculation results.
On Saves calculated values every time a certain time ( [Length] ) elapses
from the start of measurement. Set the calculation interval equal to the
[Length] .
Ref Time Automatically adjusts the initial interval length so that calculated values
are saved every time a certain time elapses from the start of measure-
ment. (The initial interval alone will be shorter than the
[Split Length] .)
The reference time and time interval for calculations are set with [Split
time] and [Split Length] .
3
4
When set to On.
The results of
the selected
calculation (no.)
are displayed.
The results of the select-
ed input unit are dis-
played. Press
UNIT to
switch the display to an-
other input unit.
Select whether to display
calculations from the start of
measurement (normal), or
the latest calculations after
each interval (split value).

When split calculation is dis-
abled, the split value is dis-
played as "- - -".