Hioki LR8410-20, Инструкция по эксплуатации

Страница: 171 / 364

6.1 About Saving and Loading Data
159
3
Chapter 6 Savi
ng & Loadi
n
g Dat
a
6
Data measured using the instrument can be saved to an SD memory card or USB
flash drive.
See:
"2.6 Inserting a SD Memory Card or USB Flash Drive (when saving data)" (p. 60)
Data saved (in binary format) to removable storage can be reloaded into the instru-
ment.
When saving data, a folder named HIOKI_LR8410 is created, and files are stored in
the folder as follows.WAVE**** and MEAS**** are used as filenames when saving
data manually when no save filename has been set. When saving data automati-
cally with no save filename set, the AUTO00001.xxx filename format is used.
Saving & Loading

Data
Chapter 6
6.1 About Saving and Loading Data
HIOKI_LR8410
CONF001.SET(settings data)
WAVE0001.MEM
(Settings data folder)
CONFIG
(Waveform data folder)
DATA
MEASUREMENT
WAVE0001.CSV
PICTURE
(Folder for calculation-specific
files)
(Screen image folder)
10-03-01
(the folder name is the
date of file creation)
MEAS0001.CSV
SCR00001.BMP
ALL
PART
(calculation results
for each split inter-
val when split calcu-
lation is enabled)
MEAS0001.CSV
MEAS0001_1.CSV
MEAS0001_2.CSV
These files are created for
automatic numbering, and
contain no data
(calculation results
from start to stop)
When split calculation is enabled,
both ALL and PART folders are creat-
ed, with calculation results from start
to stop stored in the "ALL" folder, and
calculation results for each split inter-
val stored in the "PART" folder.
LIST001.BDL(settings list)
LIST001.RSV(schedule settings)
When sorting by

calculation file

on the system screen