Hioki LR8410-20, Инструкция по эксплуатации

Страница: 125 / 364

4.2 Observing Waveforms
113
3
Chapt
er
4 Observing
Me
asurement
s and
D
at
a
4
View data during and after measuring on the Waveform/Numerical Screen.
Press the WAVE/DATA to display the Waveform/Numerical screen. Repeated key
presses cycle the screen through nine types (p. 34).
4.2 Observing Waveforms
Displaying Waveforms (Display Descriptions)
Analog waveforms
Displays acquired

data as waveforms.
Trigger Mark
Indicates a trigger event
Jump Function
(p. 117)
Time
Values
Settings can be changed.

(See indicated page for details)
• Recording interval (data acqui-
sition interval) (p. 68)
• Display time base (time per

horizontal division) (p. 94)
• Digital filtering

(noise suppression) (p. 100)
All Waveforms/Unit Waveforms/CH Waveforms
[All Wave

]
Displays the waveforms for all channels enabled for measure-
ment (On).
[UnitWave]
Displays the waveforms of each input unit.
[CH Wave]
Displays the waveforms of each channel.
UNIT1



W30
Select the input unit
with the waveforms
to view when
[Unit-
Wave] is selected.
Press UNIT to

switch input units.
Input units can be
switched in jumps
as described below.
Selects which chan-
nel’s waveform to
display when
[CH
Wave] is selected.
Waveforms can
also be switched
with the
CHAN key.
Screen Example: [Wave] display
(

: default setting)
Scroll Bar
Shows the range and position
of the displayed waveform.
Viewing the Scroll bar (p.
116)
Information such as mea-
surement start time and start
trigger times is displayed be-
The screen display span also be changed here.

(
[Gauge+Wave

]
)
• A gauge can be displayed for each channel,and channel settings can
be changed (p. 114).
• Measurement data can be displayed as waveforms and numerical
values, as numerical values with comments, or as numerical values
only (p. 115).
• Numerical values at waveform cursor positions can be viewed (p.
119)
• Numerical calculation results can be displayed (p. 183)

Unit 1 (1-1 to 15)

Unit 2 (2-1 to 15)

Unit 3 (3-1 to 15)

Unit 4 (4-1 to 15)

Unit 5 (5-1
to 15)

Unit 6 (6-1 to 15)

Unit 7 (7-1 to 15)

Alarm (ALM1 to ALM4)

Waveform Calcula-
tion 1 (W1 to 15)

Waveform Calculation 2 (W16 to 30)

returned to Unit 1 (1-1 to 15)
(Unregistered units are skipped.)
Allows you to check the communications status
and remaining battery life for units 1 through 7.