Hioki LR8410-20, Инструкция по эксплуатации

Страница: 128 / 364

4.2 Observing Waveforms
116
When measuring or displaying an existing waveform, use SCROLL/CURSOR to scroll.
From the scroll bar you can verify the relative position and
size of the displayed portion of a waveform within the overall
measured waveform.
The width of the currently displayed time span indicator
within the scroll bar depends on the time base (time per hor-
izontal division) setting, even when the recording length is
unchanged.
Scrolling Waveforms
Verifying Waveform Display Position
Screen
Display
Earlier Later
Scroll backward
Fast scroll backward
Scroll forward
Fast scroll forward
Show/hide A/B
cursors
Press both simultaneously
Jumps to the latest waveform
While measuring, you can also put the
cursor on
[Trace] (near the lower right
of the screen), and press ENTER to
jump to the latest waveform.
Jumps to the waveform
beginning
Press both simultaneously
Screen
Display
Earlier
Screen
Display
Later Earlier
Later
When measuring with the record time set to [Cont] .
If internal buffer memory becomes full, recording continues by overwriting the oldest

acquired data. Because of that, scrolled waveforms viewed while measuring are limited
to the part that has not yet been erased.
Internal buffer Memory (max. recording length): scrollable viewing time span
Erased Data
Screen Display Range
Whole Waveform