Hioki LR8410-20, Инструкция по эксплуатации

Страница: 211 / 364

8.2 Screen Key Operation Settings
199
3
Chapter 8 Sys
tem Environme
n
t Se
ttings
8
Select the display method for the horizontal axis
at the bottom of the screen. This setting also
determines the time display for data saved in
CSV format.
Horz(Time)
Disp
(Time Value
Display)
Select the display language.
Language
To help avoid operator errors, confirmation messages can be displayed when measure-
ment is manually started or stopped.
Start/Stop
message
(Start/Stop
Confirmation
Messages)
Selecting the Horizontal (Time) Axis Display
1d2h3m4s
(Time)
‘08-07-10 12:10:30
(Date/Time)
10
(Data Point)
Setting options:(

: default setting)
Time* Displays the time span from the start of measurement. If triggering is
enabled, the displayed time span is from the last trigger event.
Date Displays the date and time every ten divisions.
Data
Pts Displays the number of data points from the start of measurement.

If triggering is enabled, the displayed data points begin from the last
trigger event.
Selecting the Display Language
Setting options:(

: default setting)
English

Display in English.
Japanese Display in Japanese.
Display of Start/Stop Confirmation Messages
Setting options:(

: default setting)
Off Confirmation messages are not displayed.
Pressing
START and STOP start and stop measurement immediately.
On
 Confirmation messages are displayed. To start or stop measurement,
move the cursor to “Yes” and press
ENTER .