Hioki LR8410-20, Инструкция по эксплуатации

Страница: 187 / 364

6.3 Loading Data on the instrument
175
3
Chapter 6 Savi
ng & Loadi
n
g Dat
a
6
When loading waveforms
When the amount of data in a file to be loaded exceeds the internal buffer memory capacity,
you can specify a data point (number) at which to start loading (
[ Top of data num ] in fig.
below). The loadable data size shows the [Readable data num] (maximum number of data
points) that can be loaded. This setting is not needed if the data to be loaded will fit in inter-
nal buffer memory. Select
[OK] to load the data.
Waveform data file name
Waveform data start trigger time
Number of data points in the file
Channels saved in waveform data to be load-
ed (Analog and Alarm)
Maximum number of data points that can be
loaded (to internal buffer memory)
Settable range of offset to first data point
Times of first and last data points to be loaded
Unit registration information and communications settings (LAN, USB) can also be loaded. Select the check-
box for the settings you wish to load. Settings for unselected checkboxes will not be loaded.