Hioki LR8410-20, Инструкция по эксплуатации

Страница: 34 / 364

1.2 Measurement Flow
22
1.2 Measurement Flow
1. Register measurement units, and wireless loggers with the instrument
Each instrument can connect wirelessly to up to seven measurement units, and
wireless loggers.
Once a measurement unit and wireless logger has been registered, device registration
information will be saved even if the instrument, measurement units, and wireless log-
gers are turned off (p. 59), unless the unit’s registration information is initialized(p. 203)
or the unit is deleted(p. 58).
(1) Place the measurement unit and wireless logger close to the instrument

(in a location where there are no obstructions to wireless communications).
Unit Registration screen
Configuration Navigator screen

(see the Measurement Guide)
(2) Connect an AC adapter or fully charged battery pack to the instrument and
measurement unit.

Connect the AC adapter to the wireless logger or install its batteries.
(3) Turn on both the instrument and the measurement unit.
(The wireless logger will turn on automatically once the AC
adapter is connected or batteries are installed.)
(4) Register the measurement unit and wireless logger. (p. 55)

(If there are no registered units when the instrument is powered on,

[QUICK SET] - [Unit Guide] will be displayed initially. For more information about the
[Unit Guide] , see the Measurement Guide.)
Up to 7 measurement units and wireless loggers
Measurement unit Wireless logger Instrument
Instrument/
Measurement unit
Wireless
logger