Hioki LR8410-20, Инструкция по эксплуатации

Страница: 201 / 364

7.1 Calculate Average, Maximum, Minimum, and Etc.
189
3
Cha
p
te
r 7
Numerical Ca
lcula
tions/W
avef
orm Cal
cula
tions
7
After measuring, calculation can be applied to a specified time span.
Make any other calculation settings before specifying the calculation time span (P.188 , 1
to 5).
Apply Calculations to a Specific Time Span

(Manual Calculation Only)
1
4
Press the left/right SCROLL/CUR-
SOR keys to move the A/B cursors
to specify the time span.
See:
Changing the cursor to move (p.
118)
Move to a [Span] item.
3
Apply
Open the setting options
for the item to be set.
Select [Switch to Calc] .
Apply
5
Select [Exec] .
Apply
The results of calculations are
displayed.
Press SCROLL/CURSOR to display
A/B cursors.
4
5
Select the calculation time
span.
See the table at the right for

setting choices
Setting options: (

: default setting)
All * The entire acquired waveform
A-B The time span between cursors
A and B
Start-A From the start of the acquired
waveform to cursor A
Start-B From the start of the acquired
waveform to cursor B
A-End From cursor A to the end of the
acquired waveform
B-End From cursor B to the end of the
acquired waveform
2
1
2