Hioki LR8410-20, Инструкция по эксплуатации

Страница: 163 / 364

5.9 Alarm Output
151
3
5
Chapter 5 S
p
ecif
ying Crite
ria
for M
easurement
s
You can enable beep tones and an alarm output signal (for external use) for
each input channel by setting its alarm criteria.
External alarm output requires connection to the external control terminals.
See "9.3 Alarm Signal Output (Alarm Output)" (p. 207) for details.
5.9 Alarm Output
Warning detection is not performed in the event that there is no data due to
an interruption of communications with measurement units and wireless
loggers (with the exception of a warning indicating that such an interrup-
tion of communications has occurred). Detection processing is performed
all at once after communications with measurement units and wireless log-
gers have been established and data restored, and then warnings are
issued when the warning conditions are satisfied. Alarm output is gener-
ated at the same timing.(p. A 33)

• Output response time

Recording in 3 sec or less

(with 1 measurement unit or 1 wireless logger connected with good com-
munications)

Recording in 5 sec or less

(When seven measurement units and wireless loggers are connected
with good communications)

Weak communications may result in longer output update times.