Hioki LR8410-20, Инструкция по эксплуатации

Страница: 278 / 364

10.7 Sending E-Mail
266
Setting Items
Mail Server Sets the mail server name or IP address.
Enter the server name or IP address as specified by the network system
administrator or Internet service provider.
Mail server
settings
Sender
Address
Enter the sender's e-mail address.
Sender Name Enter the sender's name.
Subject Enter the subject for mail notifications.
Message Enter the text for mail notifications.
Attach data Enable/disable attachment of measurement data

(Data sends only when Start trigger, Stop trigger, alarm event occurs or
when sending a regular mail).
Mail server name Enter the mail server name.

Specifies the SMTP mail server.
Setting options:Up to 32 characters.
IP Address Set the IP address of the mail server.

Specifies the SMTP mail server.
Setting options:_._._._ (where _ is 0 to 255, e.g.,
192.168.1.100)
IP / Port Set the port address of the mail server. Default is port 25.If
the mail server is using a port other than the standard port
(25), set to that port number.
Setting options:1 to 65535
Setting options
Up to 32 characters.
(e.g., logger@xyz.xx.xx)
Setting options
Up to 32 characters. (e.g., logger)
Setting options
Up to 32 characters. (e.g., logger_mail)
Setting options
Up to 32 characters.
(e.g., E-mail from logger)
Setting options: (

: default setting)
Off

Do not attach measurement data to e-mail.
On Attach measurement data to e-mail.