Hioki LR8410-20, Инструкция по эксплуатации

Страница: 110 / 364

3.8 Entering Titles and Comments (as needed)
98
You can assign titles to measurement data, comments for input waveforms, and
unit IDs (up to 20 double-byte or 40 single-byte characters; up to 8 double-byte or
16 single-byte characters for unit IDs). Titles and comments are shown on Wave-
form/Numerical screens (comments are displayed only on the
[Value+Cmnt]
screen). Unit IDs are displayed on the [Wave+Cmnt] and [Value] screens.
Titles can be set on the [Setting] screen and [Comment] screen. Comments can be
set on the [CH] screen and [Comment] screen. Unit IDs can be set on the [UNIT]
screen.
Filenames and folder names can be entered in the same manner.
See:
"6.2 Saving Data" (p. 162)
See:
"6.4 Data Management" (p. 176)
This section describes how to enter comments on the [CH] screen.
3.8 Entering Titles and Comments (as needed)
The Setting screen cannot be displayed while measuring.
Select the [CH] screen.
Select the field to enter
the comment.
1
2
Apply
The character entry screen
appears.
3
Select the characters to
enter
To enter a space, select a
blank character.
Apply
Characters appear in the en-
try field as you select them.
Entry field
Navigate the entry field Finished with entry