Hioki LR8410-20, Инструкция по эксплуатации

Страница: 55 / 364

2.1 Using the Battery Pack (Option)
43
3
2
Chapter 2 M
eas
ureme
n
t Prep
ar
at
ions
• For reasons involving the battery pack’s characteristics, the displayed
remaining battery life will differ from the actual amount of remaining
battery power depending on the settings in use, operating tempera-
ture, and number of battery charge cycles.
• When charged at low temperatures near 5°C, the battery pack will not
charge as fully as when it is charged at 23°C.
When to charge
Instrument:
When powering the instrument from the battery pack without the Model Z1008 AC
Adapter, the low battery indicator (
) is displayed when the battery is almost out
of power, indicating that the battery pack requires charging.
The battery will be completely out of power approximately 10 minutes after the instru-
ment’s battery icon changes to (
) (after being fully charged, with 2 measurement
units connected, while saving waveform data to the SD memory card [in real time], with
70% backlight brightness, with the backlight saver off, reference value at 23°C).
Measurement units:
When powering the instrument from the battery pack without the Model Z1008 AC
Adapter, the battery LED (BATT) will change from being lit up to flashing when the bat-
tery is almost out of power.

The battery will be completely out of power approximately 1 hour (with a recording
interval of 100 ms) or 10 hours (with a recording interval of 1 min) after the unit’s bat-
tery LED starts flashing (after starting measurement with the battery fully charged, ref-
erence values at 23°C).
Approximate charging time(Instrument and measurement units):
Charge time: Approx. 7 hours (when charging a battery pack with little power left)