Hioki LR8410-20, Инструкция по эксплуатации

Страница: 48 / 364

1.4 Basic Operation
36
Start measuring (acquiring measurement data) as follows.
When Auto saving is enabled, data is recorded to the specified removable storage (SD
memory card or USB flash drive) as it is being recorded to internal buffer memory.
Starting and Stopping Measurement
Press START .
(The green LED lights.)
Start Measurement
Important
If [Start/Stop message] is enabled on the System screen, the
Start confirmation message appears. Select [Yes] to start mea-
surement.
When restarting measurement after stopping, data in the instru-
ment’s internal memory is overwritten. Be sure to save impor-
tant data to removable storage before restarting measurement.
When [Repeat] (record multiple instances of the specified
recording length) is enabled or [Record time] set to [Cont]
(record continuously) :
Pressing STOP stops measuring.
When [Repeat] is disabled (Off) or [Record time] set to [Time] :
Measuring stops after the specified recording length.
(If [Start/Stop message] is enabled on the System screen, the Stop con-
firmation message appears when you press STOP during measurement.
Pressing STOP during recording displays a confirmation message. Select
[Yes] to stop measuring.)
Finish Measurement
For details about repeating and continuous recording:
See:
"Recording time specification(Record time specification)"(p .69),
"Repeat Recording (Repeat)"(p .69)
To automatically save measurement data, confirm the following before
starting:
• Auto saving is properly set (p. 163)
• The removable storage is properly inserted (p. 60)
• There is sufficient free space on the removable storage (p. A14)