Hioki LR8410-20, Инструкция по эксплуатации

Страница: 183 / 364

6.3 Loading Data on the instrument
171
3
Chapter 6 Savi
ng & Loadi
n
g Dat
a
6
Previously stored binary waveform data, captured screen images and saved setting con-
figurations can be reloaded into the instrument (p. 159).
Setting configurations saved in the instrument's memory or on a removable storage can
be reloaded.
6.3 Loading Data on the instrument
Communications settings (LAN, USB) cannot be loaded while the instru-
ment is sending an e-mail.(p. 263)
Loading a Setting Configuration
Select the [Setting]
Screen.
Select [Load Set.] .
1
2
Select the configuration
file to load.
Apply
The loading dialog appears.
3
Select the load destination.
Apply
(If you selected [SD Card] , or [USB
memory] )
When Loading from removable storage
Configuration files stored in the [HIOKI_LR8410]-
[CONFIG] folder on the removable storage are
displayed.
See:
To Save a Setting Configuration: (p. 170)
When Loading from instrument Memory
The list of configurations stored in instrument
memory is displayed.
(If you selected [Memory] )
Select [Load] for the con-
figuration you want to
load.
_
.SET:

(settings data)
Measurement condition
settings
_ .
BDL
:

(settings list)
List of all settings saved in
the instrument’s memory
_
. RSV :

(schedule

settings)
Schedule information con-
sisting of measurement
start and stop dates
(continues on next page)