Dell PowerVault 720N Скачать руководство пользователя страница 587

Страница: 587 / 606

Command ReferenceA-173

NAME

syslogd - log system messages

DESCRIPTION

The

syslogd

daemon logs system messages to the console, log files and other

remote systems as specified by its configuration file,

/etc/syslog.conf

. The

sys-

logd

daemon reads its configuration file when it starts up during the boot

procedure, or within 30 seconds after the

/etc/syslog.conf

file is modified. For

information on the format of the configuration file, see

syslog.conf

/etc/syslog.conf

does not exist the

syslogd

daemon will output all log mes-

sages of priority

info

or higher to the console and to the file

/etc/messages

. To

prevent

/etc/messages

from getting too large, the

syslogd

daemon will rotate

the contents of

/etc/messages

through the files

/etc/messages.0

through

/etc/messages.5

. This rotation is done once a week. So the log messages of the

current week will be saved in the file

/etc/messages

and the message logs of

the six weeks prior to that are saved in the files

/etc/messages.0

through

/etc/

messages.5

To prevent large numbers of repeated messages being logged, the

syslogd

dae-

mon will follow the first instance of a repeated message with the number of

times the message was repeated. If a message is repeated over a long time

period, the

syslogd

daemon will wait for increasingly longer intervals before log-

ging the number of repeats. The repeat notification interval starts at 30 seconds

and moves quickly to 20 minutes.

FILES

/etc/syslog.conf

The configuration file.

/etc/syslog.conf.sample

A sample configuration file.

/etc/messages

Message log file for current week.

/etc/messages.[0-5]

Message log for prior weeks.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 587 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: