Dell PowerVault 720N Скачать руководство пользователя страница 305

Страница: 305 / 606

Data Backup 12-13

7KHGXPS&RPPDQG6\QWD[

&RPPDQG6\QWD[

The

dump

command syntax is as follows:

dump [ option argument ] path

5XOHVIRU(QWHULQJWKHGXPS&RPPDQG

The following list describes the rules for entering the

dump

command:

option

can be a list. You must list all options together; do not separate the options

by commas or spaces.

argument

can be a list of arguments, each of which is associated with an option.

The arguments are separated by spaces.

If an option takes a list of arguments, the arguments in the list are separated by

commas.

List the arguments in the same order as you list the options.

The dump level must be the first option. You can type other options in any order.

path

is the complete path name of the file or directory to be backed up by the

dump

command.

Always precede the volume name by

/vol/

even though the volume is a root

volume. This is because between different levels of backups, you might have

changed the root volume.

NOTE: Some options do not have any arguments.

([DPSOHRID6LPSOHGXPS&RPPDQG

The following example illustrates how you use the

dump

command syntax:

dump 0ufb rst0a 63 /vol/vol0/

2SWLRQV

The following list describes the options:

is the dump level.

updates the

/etc/dumpdates

file.

specifies the tape file.

specifies the blocking factor.

$UJXPHQWV

The

and

options do not have arguments.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 305 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: