Dell PowerVault 720N Скачать руководство пользователя страница 549

Страница: 549 / 606

Command ReferenceA-135

NAME

httpd.translations - URL translations to be applied to incoming HTTP requests

SYNOPSIS

/etc/httpd.translations

DESCRIPTION

The HTTP daemon supports four URL translation rules to filter incoming HTTP

requests. The HTTP daemon applies each rule in succession, stopping at the first

successful

Redirect

Pass

, or

Fail

rule:

Map

template

result

Any request which matches

template

is replaced with the

result

string given.

Redirect

template

result

Any request which matches

template

is redirected to the

result

URL. Note

that this must be a full URL, e.g., beginning with http:.

Pass

template

[

result

]

Any request which matches

template

is granted access, and no further rule

processing occurs. An optional

result

can be used in place of the matching

URL.

Fail

template

Any request which matches

template

is denied access. Rule processing

stops after a matched

Fail

Both templates and results may contain wildcards (a star * character). The

wildcard behaves like a shell wildcard in the

template

string, matching zero or

more characters,

including

the slash (/) character. In the

result

string, a wild-

card causes text from the corresponding match in the

template

string to be

inserted into the result.

EXAMPLE

This example redirects CGI queries to

cgi-host

, prevents accesses to

/usr/

forbidden

, and maps requests to images to a local image directory:

# Example URL translations

Redirect /cgi-bin/* http://cgi-host/*

Fail /usr/forbidden/*

Map /image-bin/* /usr/local/http/images/*

httpd.translations

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 549 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: