Dell PowerVault 720N Скачать руководство пользователя страница 550

Страница: 550 / 606

A-136 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

messages - record of recent console messages

SYNOPSIS

/etc/messages

DESCRIPTION

The default behavior of the filer

syslogd

daemon (see

syslogd

) is to print all log-

ging messages of priority

info

or higher to the console, and to the

messages

file.

Every Saturday at 24:00,

/etc/messages

is moved to

/etc/messages.0

/etc/

messages.0

is moved to

/etc/messages.1

, and so on. Message files are saved

for a total of six weeks.

FILES

/etc/messages

messages file for current week

/etc/messages.[0-5]

messages file for previous weeks

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 550 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: