Dell PowerVault 720N Скачать руководство пользователя страница 306

Страница: 306 / 606

12-14 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

The argument for the

option is

rst0a

(the tape file name), and the argument for

the

option is

(blocking factor). The

rst0a

and

arguments must be listed in

the same order as the

and

options.

3DWK

The path name is

/vol/vol0/

, which means that all files and directories in the

vol0

vol-

ume are backed up to tape.

NOTE: The

dump

command consists of more options than those described in this

section. All options are described in greater detail in the next section.

'HVFULSWLRQVRIGXPS2SWLRQV

Table 12-1 describes the meanings of the

dump

command options.

7DEOHGXPS&RPPDQG'HVFULSWLRQV

2SWLRQ

0HDQLQJ

Dump

level

It is mandatory. It can be a number from 0 to 9. Level 0 is a full

backup; levels 1 through 9 are for incremental backups.

The

dump

command does not back up Windows NT ACLs.

It is the blocking factor. It takes a number as an argument, which is

the number of 1-KB blocks in each write.

If you use a local tape drive for backup, the number should be from

4 to 64. If you use a remote tape device for backup, the number

must be from 4 to 256. The

dump

command generates an error

message if you specify a number that is out of range for your tape

drive. The default argument is 63.

It takes a number as an argument, which is the number of tape

blocks in a tape file. The

dump

command writes the specified

number of tape blocks to a tape file before starting a new tape file.

The argument must be equal to or larger than the argument to the

option. If you do not specify this option, the

dump

command

writes data until it reaches the end of tape.

It is mandatory. It takes the tape file name as an argument. You

can specify a comma-separated list of tape file names.

It backs up only specific files and directories in the dump path. It

must be used with the

option.

It takes a string as an argument, which is the name of the backup

to be recorded in the

/etc/dumpdates

file. It is required if you use

the

option.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 306 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: