Dell PowerVault 720N Скачать руководство пользователя страница 464

Страница: 464 / 606

A-50 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

license - license Data ONTAP 5.3 services

SYNOPSIS

license

[

service=code

] ...

DESCRIPTION

The

license

command enables you to enter license codes for specific Data

ONTAP 5.3 services. The license codes are provided by Dell. With no arguments,

the

license

command prints the current list of licensed services and their codes.

It also shows the services that are not licensed for your filer.

The filer is shipped with license codes for all purchased services, so you need to

enter the

license

command only after you purchase a new service or after you

reinstall the file system.

To disable a license, enter the code

DISABLE

All license codes are case-insensitive. Do not leave a space before or after the

equal sign in the command.

The following list describes the services you can license:

Enter

nfs

to enable NFS.

Enter

cifs

to enable CIFS.

Enter

http

to enable HTTP.

Enter

snapmirror

to enable SnapMirror.

Enter

snaprestore

to enable SnapRestore.

EXAMPLES

The following example enables NFS:

filer>

license

nfs=ABCDEFG

nfs license enabled.

nfs enabled.

The following example disables CIFS:

filer>

license

cifs=DISABLE

unlicense cifs.

cifs will be disabled upon reboot.

license

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 464 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: