Dell PowerVault 720N Скачать руководство пользователя страница 440

Страница: 440 / 606

A-26 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

disk being removed is available, the contents of the disk being removed will

be reconstructed onto that spare disk.

The disk being removed is marked as broken, so that if it remains in the

disk shelf, it will not be used by the filer as a spare disk, and if it is moved to

another filer, it will not be used by that filer as a spare disk.

disk

remove

disk

name

removes the specified spare disk from the RAID configuration, spinning the

disk down when removal is complete. You can use

disk

remove

to remove a

spare disk so that it can be used by another filer (as a replacement for a

failed disk or to expand file system space).

disk

scrub

start

starts a RAID scrubbing operation on all RAID groups. The

raid.scrub.enable

option is ignored; scrubbing will be started regardless of the setting of that

option (the option is applicable only to scrubbing that gets started periodi-

cally by the system).

disk

scrub

stop

stops a RAID scrubbing operation.

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 440 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: