Dell PowerVault 720N Скачать руководство пользователя страница 447

Страница: 447 / 606

Command Reference A-33

performed on the filer. It can also be performed via a

restore

done on an NFS

client machine; if such a restore is being done, the client system should be

checked to ensure it supports SunOS-compatible

dump

restore

format.

Client

Dump

and

Restore

Capability

If a client is to be used for performing filer dump and/or restore, it is impor-

tant to check what the maximum dump and restore capabilities of your client

system are before setting up a dump schedule. There are some client sys-

tems which do not support dump and restore of greater than 2 GB while

others may support very large dumps and restores. It is especially important

to check the

restore

capability of your system when using the filer local tape

dump since the filer supports dumps that are greater than 2 GB.

Tape

Capacity

and

Dump

Scheduling

Along with the potential 2-GB restriction of

dump

restore

on a client sys-

tem, it is important to consider your tape capacity when planning a dump

schedule. For the filer local tape option, the Exabyte 8505 supports an

approximate maximum capacity of 10GB per tape using compression. If a cli-

ent system is used as the target for your dump, the capacity of that tape

drive should be checked for dump planning.

If your filer file system exceeds the capacity of the local tape drive or the cli-

ent system dump/restore, or you choose to dump multiple file system trees

to make the restore process with multiple tape drives parallel, you must seg-

ment your dump to meet these restrictions.

One way to plan a dump schedule with a UNIX client system is to go to the

root mount point of your filer and use the

command to obtain sizes of

underlying subtrees on your filer file system. Depending on the restrictions

of your clients dump and restore capability or recording capacity of the tape

device being used, you should specify a

dump

schedule that fits these

restrictions. If you choose to segment your dump, the

norewind

device (see

tape

) can be used to dump multiple tape files to one physical tape (again,

choose a dump size which meets the criteria of your client restore and

capacity of your tape drive).

The following example shows the

output from a filer file system on a cli-

ent that supports dump and restore that are greater than 2 GB:

client% du -s *

4108 etc

21608 finance

5510100 home

3018520 marketing

6247100 news

3018328 users

You can use a tape device with approximately 10 GB on each tape to back up

this filer. The dump schedule for this system can use the

norewind

tape

device to dump the

marketing

and

news

subtrees to one tape volume, then

dump

Содержание PowerVault 720N































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerVault 720N

Отзывы:

Dell PowerVault 720N, Справочник по командам, Страница: 447 / 606

Результаты поиска

Содержание PowerVault 720N

Отзывы: